Technical Properties
| Appearance | Clear, Transparent, Colorless Liquid |
| Chemical Type | Ethyl Cyanoacrylate |
| Specific Gravity @ 25°C | 1.1 |
| Cure Speed | 4 to 5 Seconds |
| Tensile Strength | 40-60 kg/cm² |
| Viscosity (cP) 25°C | 1.8-5 |
| Shelf Life | 6 Months |
| Pack Size | 20 & 50 Grams |
Directions for use
- Make sure the surfaces to be bonded are clean and dry.
- Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.
- Press parts together and hold firmly for few seconds, Good contact is essential. An adequate bond develops in less than one minute.
- Wipe off excess adhesive from the top of container and recap NEXUS BOND if left uncapped, may deteriorate by contamination from moisture in the air.
Precautions
- Use with proper ventilation. Avid Contact with skin & Eyes.
- If contact with skin occurs, rinse with warm or dissolve gradually with solvent such as acetone. Do not try to remove forcibly.
- If adhesive gets into eye, keep eye open and rinse thoutoughly. Seek medical attention immediately.
- Keep well out of reach of children.
Storage
Keep adhesive in a cool, dry place @ 20-25°C.
